Gadiya Electronics, has wide range of Industrial Automation products under ‘tgs’ brand, and caters to Industrial Automation segment. They have in their range - Programmable Preset Timers

Programmable Preset Timers are microcontroller based and are available in 4 digit and 6 digits bright 7 segment displays. They are compact in size and are available in sizes as 72*72, 48*96mm. Panel mount housing. Setting is through user friendly keypad,

Features Include.

32 bit microcontroller based design.
4 digit (72x72x65mm), 6 digit (48x96x65mm).
Modes like – ON delay, Off delay, Cyclic, Time Totaliser etc.
Crystal generated frequency hence highly accurate.
Time range from 0.1 sec to 9999Hrs.
Memory back for system parameters
Rugged constructions for Industrial shopfloor environment.
Single Output / two outputs also available.
Operating Voltage – 95-265VAC.

LOAD CUM DISPLACEMENT CONTROLLER

We introduce ourselves as manufacturers of Microcontroller based products for Industrial Automation. We have a wide range of Products for industrial automation.

We have individual Load controllers and Displacement controllers.

We have integrated both the applications to have a common Load cum displacement Controller.

Here we can set multiple distance points and monitor Load at each distance point simultaneously comparing it with the set Band of Load values.

If at any Point, the current Load exceeds or is below the set Load Band value a NOT OK output will be energised.

If all the Load values (at corresponding distance values) are within The Set Load band values, a OK output will be energised.

We can also transfer the values to PLC with Date and Time.

Advantages –

Need not have analog inputs to the PLCs,

Faster comparison, as the controller is dedicated for Load and Displacement comparison.

No additional PLC Programing for Load / Displacement parameters.

Optionally, Load / Distance Values can be downloaded from PLC /PC to controller.

Easy onsite calibration of Linear Transducer and Load cell at site also.

Compact size of 96x96x110mm

Features

32 Bit Microcontroller based design.

2 Line LCD Display and 7 keys for parameter setting.

User friendly Parameter settings.

Password Protection for set parameters

Accepts input from Linear Potentiometer / Load cell directly.

Fast Response - High speed Detection of Load and distance values.

On site calibration for Load cell and Linear Potentiometer.

Can be used as standalone Controller – OK / NOT OK output

Can be used with PC / PLC. Through RS485 communication.

Multiple Data points to PC / PLC  for Analysis.

Inbuilt - Inputs / Outputs. 

MODBUS RTU Transmission .

Compact Size – 96x96x110mm Only.

Supply- 85-265VAC.